In
an effort of meeting the customer values and demand in the market, companies
use lots of revenue. However, due to the lack of efficient and effective
operations management strategies, most companies always fall short of aligning
the production in line with the product demand. The performance of the
organization or company is highly influenced by the operations management. As a
business function, the organization, coordination, controlling and planning of
the resources in the firm required for the production of goods and services in
the organization, it is the highest form of business process that results in
efficiency and value adds within the organization. The success of IKEA is an example affiliated
to the efficiency of operation management. The company deals with furniture and
is based in Sweden. With more than 285 stores in 36 countries, the company can
be termed as a success. The mass production of the company results into reduced
unit costs with a higher level of utilization of capacity. According to the
belief of the company, more people should be in a position to afford their
products in this regard furniture. As a result, the aim lies within the
provision of price tags and then developing products within the range of the
quoted price tag. The brand image of the
company lies within the ability to provide high quality products that meet the
needs of their clients at an affordable price. The brand is adopted from the
capacity planning, lean management and the effective organizational
development. The concept of high quality
is fundamental since the organization realizes they do not need their product
back. It is this realization that makes the company have a test lab to ensure
that the products produced meet the standards of the local and international
development. Supplier selection has an
inclusive effect on the business and as such the company has a long term
relationship with the suppliers in an exchange of the company’s code and
procurement policies. Planning is
critical to the success of the company and a plan and secure approach is
adopted by IKEA.
Controlling,
supervision and design of the production process of a good or service is what
encapsulates operations management. In addition to this, the field also covers
the approach of redesigning business process so as they may comply with the
needs of the organization in minimization of cost and meeting the demand in the
market. The efficiency of business process in an effort of leveraging the
resources is also covered in operation management. The business operation must be outlined
carefully in order to meet the needs of the clients at a reduced cost. To this
day, the aspect of operation management covers the conversion of inputs into
outputs. Some known aspects covered in
operation management are controlling cost, system analysis, productivity analysis,
planning of materials, maintenance and management of factory equipment and
production control (Heizer & Render, 2001).
In this paper, the use of operation management in IKEA is analyzed and the
principles of application. Therefore, various concepts such as six sigma and
lean management and re-engineering approaches are evaluated. Various tools in the design, capacity, processing,
and organization control, core competences, customer satisfaction both internal
and external and problem solving are also reviewed as they are applied in the
organization in attaining a total contribution to the workforce.
IKEA happens to be a multinational private corporation that
specializes in the retail of home furniture especially furniture’s. Among the prominent furniture in the company
are pack furniture, bathroom and kitchen items among other accessories that are
readily available in the organizations global retail centers (Chopra,
2009). It is the pioneer of flat pack
design types of furniture and is acknowledged as the largest global furniture
retailer. The company was formed in 1943 by Ingvar Kamprad in Sweden. With a
constant increase in sales, the company has attained a global structure. According
to the 2011 statistics, the company had a number of 332 retail stores that are
in 38 countries. There are a variety of products that form its product
portfolio that comprise of more than 12,000 products. Therefore, the global scale of the
organization entails the presence of operations management in order to
guarantee the success of the organization. There are more than 1300 suppliers
who form a complex network that enhance the supply of the firm’s products.
There are more than 26 distribution centers for the products and more than
10,000 sub suppliers (Rask, Korsgaard &
Lauring, 2010). In
addition to this, there is a heavy reliance of the firm on the supply chain.
There are a range of products that are supplied including raw materials to
finished products.
The organization aims to “create a better every day for many
people”. Therefore, the firm includes a variety of services that go beyond the
norm of just providing great home furnishing offer. The approach is to take
social and environmental responsibility towards the customers of the firm,
suppliers, producers and co-workers (IKEA, 2011).
As indicated in the services and products offered by IKEA,
it is paramount to note that the firm operates in the furniture industry. Since
it is operating in a free and fair market where monopoly is not the order of
the day, there is stiff competition from various firms. For example, since the
organization is a global firm, other businesses that have a glbal presence are the
main competitors, among which are Walmart which is a bigger corporation
tcompared to IKEA (Hellström &
Nilsson, 2011). The
bigger the organization, the greater the economies of scale. Other competitors
are Toys R Us where the company specializes in a range of children toys that
are similar to those provided by IKEA. Lundin Petroleum, Natuzzi, Sears,
American Woodmark, Tesco, IIva, Asda, Blue Dot and Barn Furniture are among
other top tier competitors that IKEA faces. Despite the stiff competiton that the
organization facs some in the global arena and others in the regional domain,
statistics indicate a good performance of the firm since its conception. The
acquired revenue as of 2011 amounted to $4 billion while the sales increased
from 2000 to 2010 from 9.5 billion pounds to 23.1 billion pounds (Heizer & Render, 2001).
Despite the achievements outlined above, there are several
detrimental drawbacks that the company faces. The operational process are
controlled and managed from the headquarters of the firm that is based in
Almhult Sweden. Therefore, such an approach positions the organization from a
centralized management approach. As such there some evident operational
management challenges. Among them include reports from customers saying there
is overcrowding in the retail stores which inherently causes more waiting and
queueing time prior to purchase and processing.
There are several measures that have been implemented by the
organization as a response to this frustrations. Among them include the
application and establishment of customer checkouts. The checkouts are designed
to cater for customers with small items in an effort of eliminating time
wastage and eradicating the queuing process.
The company is also proud in increasing the number of
service providers and employees to cater for the growing needs of the customers.
Operations management and system principles are applied in an organization for
a number of reasons. Among them include the need to enhance store arrangement,
design of the retail store layout in a convenient manner to enhance a smooth
flow of customers in and out of the store without causing commotion. In
addition, the application of these principles enhances a style in the design of
the products that is unique and conspicuous to the brand of the company (Heizer & Render, 2001). Effective design also enhances packing, employee
contribution to the efficiency and effectiveness of the company. The retail
stores are also strategically placed in order to enhance an efficient supply
chain. Inventory management systems adoption further enhances the on shelf availability
of items. Lastly, the application of quality control systems is a guarantee to
the monitoring of the quality of the products produced. The application of
these approaches are customers oriented in an effort of creating a loyal
customer base by offering a quality customer service (Gibson, 2012)
System and operations management based principles are
utilized in the organizations for several processes such as the store
arrangement and layout in order to facilitate a smooth flow of customers;
stylish design of products in order to enable flat packing; effective job
design in order for the staff to contribute to the store effectiveness and
efficiency; placing the retail stores in the right places in order to develop
an effective supply chain; guaranteeing on-shelf availability by using
inventory management systems; and monitoring and measuring the quality of its
products by use of effective quality control systems in order to ensure high
quality service for its customers (Gibson, 2012).
In an effort of cementing its presence in the market in the
face of competition and rivalry, there are three main strategies that the
company can adopt. In the case of IKEA, these approaches are the six sigma
approach, re-engineering and the lean management approach.
The approach involves the application of defect elimination
method (Meredith & Shafer, 2012). The approach further emphasizes on the
improvement of quality as it is applied with an aim of lessening the defect
levels. The methodology aims at reducing the probability of defect to achieve a
3.4% minimum for every one million opportunities. Therefore, the application of
the approach is most suitable for organizations and firms that are dependent on
high production levels. According to Meredith & Shafer (2010), the
objective of the six sigma approach is to reduce the potential causes of errors
through identification and this leads to elimination of chances of variability
in the business process and manufacturing. There are quality management methods
that are deployed using the six sigma method (Hellström
& Nilsson, 2011).
Among them include statistical calculations and probability evaluations. A series of steps is stipulated that joins
the industry process with the application principles of six sigma. Value
targets including quality, profit, reduction of production cost, customer
satisfaction and process time reduction are among the parameters defined in the
measurement using this approach.
To ensure mass production with minimal defects, the six
sigma approach is an ideal approach for IKEA. The goods and services produced
by the organization are consistent and meet a certain level of standard that is
achieved in their test labs. Therefore, it can be concluded that the approach
is not only ideal for the company, it is the best option (Meredith & Shafer, 2002). The company uses the approach as a quality control and
improvement tool. To be specific the organization uses the approach of
defining, measuring, analyzing, improving and controlling also known as DMAIC.
The approach is used as the preferred method in an attempt of facilitating the
improvement process of the product. Notably, the company has undertaken a
number of six sigma projects such as the recent IKEA Group and SSD Global, Inc.
Lean Six Sigma Project of 15th September 2010 (Mishra, 2009). The project was initiated with the aim of increasing the
experience of customers online especially when buying and making reviews and
asking for support. There are other indications showing that the organization
applies the six sigma concept. For example, in the organization, individuals
are classified as champions that earn yellow and green belts. The product
development and improvement driven by the zeal to meet the demands of the customers,
design and optimization goals are some other indications (Mishra, 2009). Lastly, the company emphasizes on short lead times that
are attained through a reduced development and management life cycle of a
product.
Infers to a form of practice in production that emphasizes
on the need to attain the highest level of customer value at the expense of
waste reduction. The implication is the need to meet the highest level of
customer needs with the lowest amount of resources and therefore, the word
lean. Any organization that applies lean operations is adept and keen on the
needs of the customer value and emphasis is given to the process of production
in an effort of meeting the values of the customers constantly (Meredith & Shafer, 2002). The objective lies within the need to offer a perfect
customer value using the value creation process that is characterized by zero
waste. Since its operation, lean
operations have been part of IKEA’s growth and expansion. Chopra (2009) asserts that the process forms
a backbones of the company’s operations and business model. The aim is to
optimize the operations of the business from the acquisition of raw materials
to the final delivery of the finished flat packed furniture to the users. It
can be observed that the concept of lean operations appears in almost every
part and process of the business operations of the company.
In the manufacturing sector, the decomposition and assembly
of the product are essential in influencing the cost. Therefore, standardization
in the production serves as a precursor in the decomposition. On the other
hand, the assembly of standardized product parts influences the logistics in
the market. The process of decomposition and assembly can be controlled to
reduce the production costs and essentially the cost of the product as a whole.
The design for manufacturability (DFM)
concept is applied in IKEA as the conventional principal in association with
the design for logistics (DFL) (Hellström &
Nilsson, 2011). Various
variables for manufacturing, packaging and transport are taken into account in
this approach. In addition other coexisting variables such as product functions
are also inculcated which contribute to the lean product development in IKEA
(Gibson, 2012). The strategy is a cost saving approach as it reduces the cost
of producing the product by evaluating the different variables and market
changes. The customer service system if
the organization is also an approach to lean management. The customers are
engaged in the services of the firm such as the collection, transportation and
assembly of the final product after purchase.
The combination of design decomposition and the cheapest suppliers and
self-service approach towards customers, the organization benefits from lean
management from cost savings, which result to competitive price offering to the
customers (Slack, Chambers & Johnston,
2010). The result is that IKEA is able to
create customer value while at the same time increasing the revenue of the
firm. The management approach at the company also applies a lean model. The
flat organizational structure is adopted as opposed to the hierarchical
approach.
The analysis and design of a firms processes is what
constitutes process re-engineering. In an effort of enhancing the service
offered to customers, process re-engineering is adopted as an approach to
enable organization to rethink their implemented approaches. The business operations are re-engineered
with one goal in point; to enhance the customer service. In addition to this,
the approach also ensures that the firm becomes competitive and reduces the
costs of operation. The business operations are further fragmented when this
approach is used with an aim of increasing sub units that can share the
responsibilities and duties carried out by the initial higher level of business
performance. Since the establishment of
IKEA, the organization has been channeling its management efforts in the
transformation of operations with an aim of enhancing business operations. A good example in the enhancement of the
process of customer service is the introduction of an e-commerce website where
customers make purchases and orders as well as provide feedback (Meredith & Shafer, 2002). Customers can further make inquiries that relate to the
services and products offered by the firm in certain regions and also determine
the most viable products to buy compared to other online retailers. In the traditional method, the customers were
expected to walk in to the retail center to make purchases or make
inquiries. The model is convenient and
customer oriented as the needs of the clients are met through provision of a
service online.
Enterprise resource planning (ERP) systems are implemented
in IKEA which is indicative of enhanced process re-engineering. The company is always engaging in new ways to
improve its performance and effectiveness and efficiency. The Lawson
Opportunity Analyzer is applied by IKEA in order to recognize key parameters
and critical business process and enhance in the formulation of strategic goals
and objectives. Development in
technology is also another area that the company specializes in to improve the
quality of products. Quality and price
are the main focus of technology. In addition, function and design, health and
environment and development phase are also key elements of focus. Several techniques of forecasting are applied
including the Delphi technique (Meredith &
Shafer, 2002). In this approach, a group of experts is
responsible for the forecast as they respond to a set of questionnaires.
Planning for the future is essential towards the success of
an organization. There are key areas of forecasting that are applied in a
business. Some approaches of forecasting are based on the subjective criteria
while others are based on measurable and historic quantitative data. The historic data forecasting augurs well
with outside parties especially investors in the assets of the company. It is
through forecasting that the future of the company becomes known and whether to
invest in the shares of an organization. The forward prospects of an
organization are determined through the approach of forecasting and the firm
can may key decisions on whether to expand or hold (Hellström & Nilsson, 2011). There are a range
of opinions that are compiled from the experts and an evaluation leads to
providing a conclusion. In the case of
IKEA, this method is rarely applied as the organization is customer oriented
and the needs of the customers are the ones applied.
Time series forecasting is a quantitative approach that has
been the background of forecasting for IKEA. Since its conception, decisions on
development and expansion are based on the former performance of the company.
In this regard, the company relies on the previous data and performance to
determine its future performance. A good example is the expansion and the need
to adopt a supplier. During the adoption of suppliers for IKEA, several
parameters were evaluated over time. For example, the consistency of the
supplier in delivering according to the specification was a key parameter in
choosing the people to inculcate in the supply chain of the company (Wei & Zou, 2007). IKEA is famous for
the utilization of time series forecasting approach. The idea behind the use of
this method is based on the products that the company offers. As opposed to
some products, the company deals with unseasonal products; furniture.
The aim of the company as previously indicated in the
mission summary is to have everyday life at home. The objective is to have the
needs of the people and their dreams as the main source of inspiration in
design process of the product. Many people should have the ability to afford
their products irrespective of the design (Hultman,
Johnsen, Johnsen & Hertz, 2012). Therefore, it is essential to note that the design
involves the provision of price tags first.
According to the company’s developer and public relations manager June
and Marston respectively “we start with the price when we design a product and
then the customer needs” (Terdiman D, 2008). One of the tasks of the planning
manager is product planning. The approach involves product strategy, the
production and inventory strategies are also applied for the finished goods.
There are generally two types of the plan for the company which include the
modified product strategy and the typical product intention.
When the levels of customization are high, the products and
operational managers modified the product policy to meet the low manufacturing
cost and inculcated the needs of the customers.
According to the production statistics of the company, the organization
is producing 10,000 variants of products. Mass production is utilized to reduce
the cost of production. The different variants that are evident in the process
do not affect the basic production process.
Therefore the volume becomes high with a low and narrow effective
variety. The ISO certification is an approach that ensures that the needs of
the customers are met according to the international standards (Jae-Woong Byun, 2011). In addition to this, the application of the six sigma
model and the lean management approaches ensures that low costs are maintained
as the organization strives to increase its output and meet the needs of the
customers.
There exist a number of core
competencies for IKEA. Among this competencies are flat packaging,
pricing, diverse functionality and excellent customer service coupled with high
quality standards. The organization leverages a low cost business model that
gives it a competitive advantage. The firm is therefore, in a position to offer
the flat packaged furniture in a relatively low price compared to its
competitors.
The commercial success of a retail store depends on the
location. Strategic location is key to the success of the business if it deals
with warehousing. A retail store or a warehouse is pivotal to acquire an ideal
location (Jae-Woong Byun, 2011). IKEA in this regard has a high
emphasis on the location in an effort of giving convenience to the customers. A
majority of the customers for the business are young adults living in the city.
Therefore, convenience is key to attracting a high number of buyers. To tap into this high number of customers,
the stores are strategically placed in the center pf the city for convenience.
The heart of the city is easily accessible using loads and hence the company
strategically places its stores in this locations. Environmental conservation is key to the
success of the company (Hellström &
Nilsson, 2011).
Therefore, since the aim is to reach a huge number of clients, it becomes
inherently essential to attain strategically position the stores in accessible
roads using public roads. There are people who do not own cars and the
organization takes this into consideration during the position of the stores.
Other than this, other store locations are found on the on
the communities surrounded by shopping centers and malls such as upcoming gated
communities. Other strategic positions include but are not limited to
apartments and condominium surroundings (Wei
& Zou, 2007).
The stores have a wide area of coverage as consideration is given to the
packaging and the loading area in order to accommodate huge trucks that carry
the products. As such the organization maintains an environmental friendly
usage of the surrounding and eliminates commotion and traffic jams. The
warehouse comprise of showrooms and warehouses in the same building. A smooth
flow from the parking, walking to the store, making the order, order picking
and loading the goods as well as payments are integrated in a seamless manner
within the location of the store (Hultman,
Johnsen, Johnsen & Hertz, 2012). In an effort of enhancing the location and enticing the
customers to stay for longer as they either purchase or pay visit to the store,
a number of facilities are included. Among them include a play area for
children that is monitored and supervised, a baby room as well as parent’s
rooms. Others include entertainment areas such as small cinemas. There are also
restaurants and cafes that people relax in as they either wait for their order
processing and packaging or while taking a tour of the organization.
The mission of the organization is
particularly clear. As previously stipulated, the company aims at producing
high quality products that are affordable to the highest majority. To achieve
this, there are several methods that are applied in the organization as was
previously discussed. Among them include the use of the six sigma model
approach where the product is design and synthesized with an aim of producing
huge amounts of products without defect. When the products are defected, it
clearly shows lack of enthusiasm and commitment of the organization to the
needs of the clients (Hultman, Johnsen,
Johnsen & Hertz, 2012). On the contrary, IKEA sets a good example for a
company to be emulated as it strives to meet the needs of its clients through
inculcating the available resources to achieve this effect. The application of
the six sigma model has ensured that the company has a laboratory to test its
goods and products to ensure that they meet the required specifications. The
various products are tested on the local and international level to ensure that
quality is attained.
The company is striving to acquire
the latest technology to ensure that the products it releases in the market are
not only of high quality but also in line with the emerging trends and concepts
in the market. In doing so, there are some added cost that the company incurs
such as research costs to determine the most effective tools to adopt in the
production of its goods and services (Heizer
& Render, 2001). A good example is the 2010 acquisition of the ERPs
systems that was to integrate all the departments in the organization. Prior to
its acquisition, research was carried out and this increased the costs for the
firm. The operations of the company revolves under a given philosophy. In this
philosophy, the company believes in doing their part and leaving the other part
to the customer who leverages low costs in doing their bit.
A new website design was provided in 2007 that
rolled in 24 countries worldwide. In the new model of the website, the emphasis
was on the quality of the organizational products as the furnishing products
knowledge with the customers. The approach was a counter attack to the
competitors whose emphasis was on the delivery of basic data on the promotions
and the products price. The quality of
the products offered by the company is evident and as such, the organization
approach of sharing production data was to ensure that the people are
guaranteed of high quality of what they buy (Heizer
& Render, 2001). Cheap innovation and style are a core complement
of the products underlying level of quality. The design and development slogan
and philosophy are made with the aim of increasing the quality of the company
products and communicated through digital offering.
The application of inspection
ensures that quality is maintained in accordance with the provided policy and
regulations of the firm. Inspection is particularly important in the production
process to ensure that all the principles and rules are carried out and
implemented accordingly. In this aspect, IKEA excels as it does not only
implement the approach of inspection, but also applies testing to guarantee
that the produced items are compliant with the needs of the customers, the
organization policies and the international standards (Hultman, Johnsen, Johnsen & Hertz, 2012). It is
paramount to note that the application of inspection and testing is in line
with the company’s strategy and need to provide high quality products at an
affordable price.
The discussion provided in this paper extrapolates the need
of the company to effectively and efficiently provide services and products to
its customers. Business operations are the driving force towards the success of
the organization. The model used aims at integrating management concepts to
attain a low cost of production and ensure that the firm makes the highest
level of profit within the bounds of the mission statement which aims at
delivering the quality products that is affordable to the highest number of
people (Arrigo, 2005). It emerges that IKEA is a good example of a multinational
organization that applies effective operations management.
Arrigo, E. (2005). Corporate
Responsibility and Hypercompetition. The Ikea Case. Symphonya. Emerging Issues In
Management, (2). doi:10.4468/2005.2.04arrigo
Heizer, J., & Render, B. (2001). Operations management. Upper
Saddle River, N.J.: Prentice Hall.
Hellström, D., & Nilsson, F. (2011).
Logistics‐driven packaging innovation: a case study at IKEA.International
Journal Of Retail & Distribution Management, 39(9), 638-657.
doi:10.1108/09590551111159323
Hultman, J., Johnsen, T., Johnsen, R.,
& Hertz, S. (2012). An interaction approach to global sourcing: A case
study of IKEA. Journal Of
Purchasing And Supply Management, 18(1),
9-21. doi:10.1016/j.pursup.2011.11.001
Jae-Woong Byun,. (2011). Value-based
Services for Sustainable Business: A Case Study of IKEA.Journalofdistributionandmanagementresearch, 14(3), 147-166.
doi:10.17961/jdmr.14.3.201108.147
Meredith, J., & Shafer, S. (2002). Operations management for MBAs.
New York, NY: Wiley.
Mishra, D. (2009). Operations management. New
Delhi: Global India Publications.
Rask, M., Korsgaard, S., & Lauring,
J. (2010). When international management meets diversity management: the case
of IKEA. EJIM, 4(4), 396.
doi:10.1504/ejim.2010.033609
Slack, N., Chambers, S., & Johnston,
R. (2010). Operations
management. Harlow, England: Financial Times Prentice Hall.
Wei, L., & Zou, X. (2007). IKEA in
China: Facing Dilemmas in an Emerging Economy. Asian Case Res. J., 11(01), 1-21.
doi:10.1142/s0218927507000849
